Full Exterior & Foundation Assessment
Grading, drainage, gutters, downspouts, flashing, window seals, and all exterior envelope penetration points — the first line of defense against moisture intrusion.
9 CHECKPOINTS CONTROL TEST
Make Sure Your Home is
a Safe Place to Breathe
Protect Your Health and Property with Pure Care Maintenance's Mold Inspection Protocol and Testing Service from Certified Professionals
Professional mold & contaminant assessment provided at your location using a 90-point inspection protocol* across 10 critical zones — from attic to crawl space. Lab-certified results. IICRC-aligned reporting. Get total peace of mind.
*The inspection protocol point system varies from property to property depending on the size, layout, structure, accessibility, and ventilation system of the property. Every effort is made to provide the most thorough inspection protocol possible.
- The Hidden Dangers
Unseen Mold
Doesn't Announce Itself.
Most mold grows behind walls, under floors, in attics, and inside HVAC systems — completely invisible to the homeowner. By the time you smell it or see it, the problem is often extensive. A professional assessment finds it before it finds you.
What's Included -
A Complete, 90-Point Inspection Protocol Service
Our technicians follow a rigorous, standardized checklist across every zone of your home — nothing is guessed, nothing is skipped.
(IMPORTANT NOTICE: Avoid hiring the same company for mold inspection, testing, and mold remediation. This creates a conflict of interest, whereas the remediator might overstate the problem to increase their fees. Since we only provide inspection and testing services, you're receiving an unbiased assessment, ensuring that the inspection and testing are accurate and remediation is truly necessary.)
Our Inspection Checklist Includes:
Attic Inspection
One of the most overlooked mold zones. We inspect decking, rafters, insulation, ventilation, and check for improperly vented exhaust fans that are a leading cause of attic mold.
10 CHECKPOINTS IR CAMERA AIR SAMPLING
Full Exterior & Foundation Assessment
Grading, drainage, gutters, downspouts, flashing, window seals, and all exterior envelope penetration points — the first line of defense against moisture intrusion.
9 CHECKPOINTS CONTROL TEST
HVAC System Inspection
The evaporator coil, drain pan, condensate line, ductwork, plenums, and air handler are inspected and tested. A contaminated HVAC system distributes mold spores throughout your entire home.
10 CHECKPOINTS REGISTER SAMPLING
Basement & Crawl Space
Vapor barriers, rim joists, sill plates, subfloor, foundation walls, sump pits, and insulation — all measured and photographed. Crawl spaces are one of the most common sources of whole-home mold issues.
11 CHECKPOINTS BORESCOPE
Air & Surface Sampling
Calibrated air pump spore trap sampling, tape lift surface samples, and bulk material collection — all sent to an AIHA-LAP accredited laboratory with a full chain of custody.
FULL PHOTO DOCUMENTATION QUICK DELIVERY
Certified Inspection Report
A comprehensive written report with all findings, moisture readings, lab results interpreted with indoor-vs-outdoor comparison, root cause analysis, and IICRC S520-aligned remediation recommendations.
11 CHECKPOINTS BORESCOPE
Also Included at No Extra Charge:
✓Outdoor control air sample (baseline comparison)
✓Thermal IR camera scan of all exterior walls
✓Moisture readings at up to 20+ locations
✓Full-home humidity & temperature mapping
✓Recommend Remediation Protocols, if needed
✓Post-remediation verification (PRV)
recommendation
The Protocol —
Nothing Is Left
to Chance.
Our 90-point inspection protocol was developed to systematically identify every potential mold growth zone, moisture source, and biological contamination risk in the property — following IICRC S520 standards and EPA guidelines.
✓ 10 distinct home zones systematically inspected
✓ Every item priority-rated: High, Medium, or Routine
✓ Moisture meter readings taken up to 20+ locations
✓ Thermal IR imaging of all exterior walls included
✓ All findings documented with photos and readings
✓ 3 Lab samples collected with strict chain of custody
✓ Results compared to outdoor baseline control sample
ABOUT OUR MOLD TESTING SERVICE
Pure Care Maintenance offers mold testing service with or without our 90-Point Inspection Protocol service. Testing is conducted by an IICRC-certified mold inspection professional to determine if mold is a problem in your indoor spaces. If the test results indicate a mold issue, we can help you come up with a solution to resolve the issue quickly and affordably.
The type of testing we provide is air quality mold spore trap testing. Mold spore trap tests are the best kind of testing to determine the overall mold activity, the levels of mold, and the types of molds around
the tested areas. The testing results will then give us the best course of action you should take next. We serve the entire Lehigh Valley and surrounding areas, including Allentown, Bethlehem, Easton, Northampton County, Lehigh County, Berks County, Montgomery County, Carbon County, and Monroe County in PA (additional mileage fees may apply for areas outside of our Lehigh Valley location).
About The Mold Tests
Our Air Quality Mold Spore Trap testing service verifies the levels and types of mold present in your home or facility. It's impossible to tell with the naked eye what type of mold you might have. Some types of mold, like the toxigenic "black molds", are harmful even in low quantities that are not yet visible. Pure Care Maintenance offers a mold testing service dedicated to keeping your indoor spaces safe and healthy, at a price that won't break the bank.
What's Included with Inspection -
Simple, Transparent, Thorough.
Our technicians follow a rigorous, standardized checklist across every zone of your home — nothing is guessed, nothing is skipped.
Schedule & Consult
Call or book online. We review your concerns, home details, and any prior water damage history before we arrive — so we know exactly where to focus.
On-Site Inspection
A certified technician conducts a full 90-point inspection with moisture meters, thermal IR camera, borescope, and air sampling equipment. Typically 2–4 hours for an average home.
Lab Analysis
All air and surface samples are sent same-day to an AIHA-LAP accredited laboratory. Results are typically returned within 24–48 hours with full chain of custody documentation.
Report & Guidance
You receive a comprehensive written report with all findings, lab results, moisture maps, photos, and clear remediation recommendations. We walk you through every finding personally.
Frequently Asked Questions -
Common Questions
Everything you need to know before you book your inspection.
How long does an inspection and testing take?
A typical single-family home inspection takes 2–4 hours, depending on the size of the property and the number of areas of concern. Larger homes or properties with extensive visible moisture issues may take longer. We never rush — every item on the 93-point checklist gets proper attention. Testing takes an additional 10-12 minutes per test.
Do I need to be home during the inspection?
We strongly recommend that you or an authorized representative be present. Your firsthand knowledge of where you've noticed odors, visible staining, or past water events is invaluable to our inspector. You'll also be able to ask questions in real time as findings are made.
What’s the difference between a mold inspWhat’s the difference between a mold inspection and mold testing?ection and mold testing?
A mold inspection is a visual and instrument-based assessment of the property to identify moisture sources, suspect mold growth, and at-risk areas. Mold testing involves collecting air or surface samples and sending them to a laboratory to identify the species and quantity of mold present. Our service combines both for the most complete picture of your indoor air quality.
How soon will I get my mold testing results?
Samples are submitted to our accredited laboratory partner the same day. Standard turnaround is 72 business hours. We then compile the full inspection report, including lab results, photos, moisture readings, and recommendations — typically delivered within 48 hours of the inspection.
Do you do mold removal and mold remediation too?
No — and that's by design. We are a mold assessment and inspection company only. This separation of services is an industry best practice and ethical requirement: the company that identifies the problem should not be the same company paid to fix it. This eliminates conflict of interest and ensures our findings are completely unbiased. We provide clear remediation recommendations and can refer you to qualified contractors.
Will my homeowner’s insurance cover the inspection?
It depends on your policy and the cause of the mold. Mold resulting from a covered peril (like a burst pipe) may be covered. Mold from long-term moisture issues or deferred maintenance typically is not. We provide detailed documentation that can be submitted to your insurer, and we're happy to work with your insurance adjuster if needed.
When should I get a mold inspection?
We recommend an inspection if you notice a persistent musty odor, visible discoloration on walls or ceilings, experience unexplained respiratory symptoms, have had any water intrusion or flooding, are buying or selling a home, or have recently completed mold remediation and need clearance testing to confirm the problem was fully resolved.
What’s the price of your mold inspection and testing services?
The price of service will depend on your needs, the size of the property & space being serviced, the distance the inspector will need to travel, the number of tests needed, etc. To determine the price of your service, please fill out and submit the price quote form on this page so we can give you an exact price quote within 1 business day.
